Sick system

  1. #1
    tommy2k8 is offline Full Member

    Sick system

    My client's laptop is going really really slowly.
    I've done:

    AVG - clean
    spyware - clean
    malware - clean
    hijack this - clean
    CCleaner and Defrag done

    I did a Memtest - nothing wrong there.
    I performed storage tests with TuffTest - interestly, the Internal Controller Diagnostic Test failed, but the Seek Test and the Surface Analysis passed!!

    I downloaded the manufacturer's disk test, and that passed. Then I ran SMART with the Stellar Smart Early Disk Warning System - the Fitness level on every test was 100%, except that the Seek Error rate is 32% and the Write Error Count is 22%! These don't look right.

    All the processes, memory and CPU usage look fine,

    51C - CPU Temp, 38C - HDD

    Nothing out of the ordinary in the Event Log either.
    BIOS is latest BIOS

    Systems specs:

    Fujitsu Siemens Amilo Pro V7010
    Fujitsu PL501 motherboard
    BIOS: Fujitsu Siemens / Phoenix 1.10 28/12/04

    This is strange:

    BelArc reports it has got 1024MB memory in slot 1, and then directly under Installed Memory, it says there's only 480MB!

    FUJITSU MHT2040AT 40GB HDD
    Windows XP SP3

    My mate tested the disk on a Linux system and he said it was fine.

    Whats happening?!


  2. #2
    brain_damage is offline D-A-L Team Member (UK)
    have you got a stick of faulty ram because with 1 stick of 512 them - 32 for graphics makes 480

  3. #3
    tommy2k8 is offline Full Member
    Latest news:

    I downloaded Process Explorer; screenshot attached' I have shut down MSN, which was hogging a lot of system memory and CPU.
    (I think there is a rogue process running)
    I've also downloaded Security Task Manager, screenshot attached, and I also downloaded Hijack This!
    I don't like that GrooveModule entry in the STM

  4. #4
    tommy2k8 is offline Full Member
    Here are the attachments
    Attached Images
    Attached Files

  5. #5
    brain_damage is offline D-A-L Team Member (UK)
    your hijack report can you please put it in the spy ware thread

  6. #6
    Have you tried reinstalling your windows xp?
    I would also suggest using Knoppix and observe if it will show same slow down, otherwise its your OS

  7. #7
    tommy2k8 is offline Full Member
    I haven't tried reinstalling XP yet.

    I can't find a 'plain English' guide (yes I've tried Wiki) on how to burn the iso of Knoppix yo CD (without extracting the files?)

  8. #8
    rootboy is offline Newbie
    This might help:

    Burn Knoppix iso to CD? - Knoppix.net

    Not only with the burning of your CD, but general help with Knoppix as well.

    I hear that Deepburner is a good burner program for Windows. I use K3B, so I couldn't say personally...

    DeepBurner

+ Reply to Thread