Hi,

I get this error msg at the POST screen:

"Warning! Now System is in Safe Mode.
Please re-setting CPU or Memory Frequency in the CMOS setup."

But after i press F1 my PC works normally..

What should I do?

My MoBo is Asus P5ND2 SLI

Did this just start to happen? Was it working without this warning before? This generally will be from either Overclocking to settings not appropriate or else the RAM or CPU are sending signals the board is having troubles with. F1 is an error bypass.

In your manual:

http://dlsvr03.asus.com/pub/ASUS/mb/...i_series_b.pdf

It suggests in the Setup (Press <Del> during POST) Exit Menu to Load Setup Default

Hi,

I get this error msg at the POST screen:

"Warning! Now System is in Safe Mode.
Please re-setting CPU or Memory Frequency in the CMOS setup."
Without me even touching the BIOS or MoBo settings??

What should I do?

My MoBo is Asus P5ND2 SLI

Go to the BIOS settings and restore the Default settings.

You should see that option probably on the General tab.

did that already but i still keep gettin the error msg

Hi,

I have a weird problem, my PC hangs at the Windows loading screen. I can go to Safe Mode but I dunno wat to do. I tried System Restore but it didn't work.

Also i get this error msg in POST screen:
"Warning! Now System is in Safe Mode. Please re-setting CPU or Memory Frequency in the CMOS setup"

My MoBo is ASUS P5ND2-SLI. I posted this problem twice & i got no help
"http://www.d-a-l.com/help/showthread.php?t=38469"
"http://www.d-a-l.com/help/showthread.php?t=48222"

I merged your threads. Please stay with one thread per issue. You never responded to this post of mine: Did you load you BIOS Defaults?

Originally Posted by jephree

Did this just start to happen? Was it working without this warning before? This generally will be from either Overclocking to settings not appropriate or else the RAM or CPU are sending signals the board is having troubles with. F1 is an error bypass.

In your manual:

http://dlsvr03.asus.com/pub/ASUS/mb/...i_series_b.pdf

It suggests in the Setup (Press <Del> during POST) Exit Menu to Load Setup Default

As mentioned above:

I did that already but i still keep getting the error msg

I would suggest clearing your CMOS.

On some boards this is just removing the battery for a few minutes.

On others there is a 3 pin jumper to short and return.

The manual should have the instructions.

The problem now evolved !!!
The pc gets stuck at the 1st POST screen (the one wid ASUS logo wid the "press delete to access bios" option).

I can't do anything, even pressing "Delete" doesn't do anythin, jus stuck.