i have put a new motherboard in my tower and having probs in were the speaker, power sw, hdd, power +,and power - ,cables go on the motherboard can someone HELP please

Hi and welcome to D-A-L

have you got a manual for the board, what make and model is the board?

if you have a look on the board you may see some small writing that shows where each wire goes

Originally Posted by brain_damage

Hi and welcome to D-A-L

have you got a manual for the board, what make and model is the board?

if you have a look on the board you may see some small writing that shows where each wire goes

no there is no manual ,dose not say what board it is and there is no writing on it

where did you get the board from?

the board should have some writing on it somewhere to identify it

the board was from a friend , all it has on it is "ms-6511 ver:1"

It's a Microstar motherboard socket A
have you got the processor and heatsink?

have a look around the edges for a block with about 8 pins coming out

I'm trying to find a manual at the moment, can your Friend give you any idea of what went where as I take it he removed it from the original PC

yes i have the processor and heatsink, there is a block with 8 pins next to were the cables go , and my friend dose not know were they went

...... ..
.........
1 17

that is what the pins are like on the board with 1 t0 17 on the board

I've found a diagram of the board, it was done for Packard Bell so microstar wont support it



I think the connections may be JFP1 the original maybe had a block connection, but they should still have writing on the them

that is the board i have got , but there is nothing to tell me were the conections go