Hi,

what do i do to ensure that the display will be ok if i remove my AGP video display adapter and replace it with a PCI video adapter?


Thanks.

Welcome to D-A-L.

All you should need are the drivers for the new adaptor card. When you first boot the machine after switching from the AGP card to the PCI card it will be in 640 X 480 mode. Install the drivers for the new card and all available Display Modes should be available to you.

Understand that most AGP cards are better than most PCI cards, as PCI is very old technology. Unless you have a very entry level AGP, plus a much better than average PCI, AGP is typically the better graphics solution.

thanks guys, i got ur massage and i think i'm ok.

This thread has been resolved and locked to prevent other users from hijacking the thread and to help others know which threads have been resolved and which are still being worked on.

If you started this thread and the problem returns, or, the case has not been properly resolved, please send a Private Message to a
Moderator to have the thread opened again. If you have a different problem, please start a new thread in the appropriate forum.