hi folks i just aquired a tiny pc in full working order i get it all up and running everythings fine i get up today and turn it on the tower powers up fine but the moniter wont the light on the monitor goes green then straight on to orange????? any ideas???? any help would be great thankyou

try tapping the power button in real quik...im not too sure though.

no ive tried all of that apparently it might be memory or graphics card any ideas how i can check? (i have no spare parts to check it with btw)

You get nothing on the monitor at all ?

No BIOS info? nothing?

Is everything else working? fans? do you hear the hard drive? lights on the drive?

Tried replugging the cable? Tried unplugging the computer from the main for a few minutes?

Do you have another monitor you can try (like the one you're reading now?)

hi jephree. the tower works as normal (well same noises anyway) no display on the moniter at all just clicks straight to stand by (orange light blank screen) exactly the same on another monitor as the title says im baffled it was fine yesterday now its not i dont get it lol

What is the exact Tiny model & # etc.?

Are you familiar with opening it up?

Do you know if the monitor is plugged into a graphics card or the Motherboard?

If you can open it up try reseating the Video Card (if it has one).

lol, im probably wrong, but you can try the brightness or darkness on the monitor?

tiny t1440bxm thats the only number i can find the monitor is connected to the graphics card (nvidia graphics if that helps) its seated fine all wires connected

Tiny's on line support isn't too great

http://support.tiny.com/support/default.asp

You can find drivers via Download | Display | nVidea
But of course that won't get you anywhere in the dark

If you don't have another graphics card to try I would look over the motherboard & search for the battery. (A camera like flat disk battery). If you see it take it out for like 10 minutes then replace & try to boot.

Do you have a manual? Unlike most companies Tiny does not put theirs on line

I would look for any switches & or jumpers on the motherboard to clear the CMOS. Removing the battery may do this.

Also any chance there is a VGA connection (monitor plug) on the motherboard?

right i tried all those things ive got all the drivers for graphics on disc but like you say its no good if i cant see. tried the battery thing no luck with that no switches or anything like it on the motherboard. i plugged the moniter into moniter plug on the motherboard it does exactly the same thing (monitor clicks straight to standby) and no ive got no manual lol sorry to be a pain but any more ideas?