Originally Posted by jephree

The fans are usually 3 pin connections and generally smaller than the standard 4 pin "molex". There should be an adapter between the two. Such an adapter is usually provided with the fan but can be purchased at any electronics store.

I'd have to read the manual regarding the RAM. Are you sure about those numbers? In general those numbers apply to IDE/ATA frequencies.



Yet you also have SATA which is faster.

You RAM should be DDR400 which runs at 800MHz FSB which on that board can be overclocked.

But i dont understand my fan has 4 pins . Shouldnt the molex connectors be able to fit in?When i look at them they look perfect but i shall check.

Not my fan is 12cm not 120mm

and a system fan not cpu


i fixed it it seems that the fan pins were a little crooked. I had to put a little force into it and and it works . im running at 33Celcius