help needed!

  1. #11
    madmikejt12 is offline Dedicated Member

    Re: help needed!

    not by the looks of it, i may be wrong but it looks like you need a socket 1 or a socket 370

    what is the make and model of the mobo?

    or existing cpu?


  2. #12
    madmikejt12 is offline Dedicated Member
    by the looks of it, your mobo seems to take a socket 370 (from google searches)

    here are some socket 370 cpu's
    http://froogle.google.co.uk/froogle?...oogle&ct=title

    1.3GHz: http://cgi.ebay.co.uk/Intel-Celeron-...QQcmdZViewItem
    Last edited by madmikejt12; 16-12-2006 at 01:11 AM.

  3. #13
    seywar is offline Elite Member
    all of my computer info is on the attachment on the other page.
    Last edited by seywar; 16-12-2006 at 12:57 PM.

  4. #14
    seywar is offline Elite Member
    it doesnt matter they cost a bit too much anyway i was just wondering if that would fit because it was reli cheap.
    do you know of anywhere that does sells cheap RAM?
    Last edited by seywar; 16-12-2006 at 12:58 PM.

  5. #15
    madmikejt12 is offline Dedicated Member
    yeah, it wouldnt be worth buying one new as there would be a huge improvement....

    try www.dabs.com or ebay... they are my 2 favorite sites for computer parts

    do you know what type of ram you are looking for? if you do not get the correct type, it may not fit

  6. #16
    seywar is offline Elite Member
    yer ive got that mem thing that scans my computer (http://www.crucial.com)

  7. #17
    madmikejt12 is offline Dedicated Member
    ok

  8. #18
    DJNafey is offline UK site moderator
    Running Windows XP Service Pack 2 on a Celeron 850MHz PC with 256MB RAM will almost always be a struggle. For the last couple of months, I've been making do with a Pentium III 1100MHz PC with 384MB RAM and Windows XP Service Pack 2 and, when I've got more than a couple of reasonably big applications open, it's really starting to get on my nerves!

    As Madmikejt12 has said, the best you can get is a 1.3GHz (or even a 1.4GHz) processor to fit your socket 370 motherboard. However, these are getting really rare now and command quite a high price for the limited benefit that you would get. Your best bet would be to replace both of the RAM modules and buy a pair of 512MB PC133 SDRAM memory modules or a single 1GB PC133 SDRAM module (assuming that your current modules are the slower PC100 standard).

    RAM will compensate for a slow processor quite well under Windows XP but it certainly won't turn your PC into something very quick. Just better. You will also still find that your hard disk is probably a bit of a performance bottleneck as it is significantly slower than a new hard disk.

    For the most cost-effective upgrade in terms of speed per pound, you might want to consider completely replacing the base unit but perhaps retaining your existing monitor, keyboard and mouse. Not only does that give you a much more significant upgrade but you then get your base unit covered by a manufacturer's warranty so breakdown costs are less of a worry. If you are looking to update a number of PCs, we are a Dell reseller specialising in helping out small businesses who want to set up an office or upgrade an existing IT infrastructure. If you are in our target catchment area in the south-east, we could come and take a look at your PCs and even offer you a part-exchange price for them. There's a link to our web site in my signature below.

+ Reply to Thread
Page 2 of 2 FirstFirst 1 2