Hi folks,

I was hoping someone could help me figure out how to get the front LED from the Logisys dracula gaming case to light up. I believe the crux of the problem is I need to plug in a 3 pin POWER LED connector and the INTEL motherboard only has 2 pins.
I have built the computer from scratch and it works fine other then lack of front panel LED which I would really love to work because the case would look so cool with the red 'eyes'.
I am using a Logisys dracula gaming case which comes with ZERO documentation and a nonfunctioning manufacturer website (well once I was able to log on but all the website had was the same specs found on a zillion other sales links) There is ZERO documentation as to the numerous wires (mic data, ear L -->appear to be for front panel sound?.... TPA+, VP, VG -->appear to be for firewire connector) but I can make due without firewire or integrated sound from the motherboard.

The components and front panel header settings and picture (if the link works are

1) Logisys Computer Dracula Gaming Case
Model No. : CS602SL

2) Intel® Desktop Board D875PBZ

Front Panel Header
Description Pins
Hard Drive LED 1 - 3
Power LED 2 - 4
Reset 5 - 7
Power ON (Power Switch) 6 - 8

Picture of the front panel Header at this link
http://support.intel.com/support/mot...esktop/pin.jpg


Any help appreciated. Thanks in advance