Hi guys!

What memory, HDD and Processor do you recommend me getting for this motherboard i have.

Also, do you have any other products that may go well if so link me.

Much appreciated. Your knowledge can help one very much

Specifications:

CPU: AMD Socket A
System: Frequency 200/266/333MHz FSB
Chipset: NVIDIA nForce2 SPP + MCP-T
Memory: (3) DDR SDRAM DIMMs (3GB)

Physical Form Factor ATX
Dimensions 305mm x 230mm

Expansion Internal upgrade slots (5) PCI, (1) AGP, (1) ACR
IDE Bus (2) Ultra DMA-66/100/133 connectors
Serial ATA RAID/IDE (1)Ultra DMA-66/100/133 connector, (2)Ultra DMA-150 connectors

AV Subsystems Video 8X AGP
Audio CMedia 8738 / 6ch

CPU Supports AMD Socket A Duron/Athlon/Athlon XP CPU
System clock supports 200/266/333MHz

Chipset NVIDIA nForce2 SPP + MCP-T

Main Memory Three 184 pin DDR DIMMs up to 3GB
Supports PC1600/2100/2700/3200 Dual-Channel DDR modules

Expansion Slots One universal-AGP slot for both 4X/8XAGP
Five 32-Bit PCI slots (v2.2 compatible)
One ACR slot supports modem, audio, LAN, Dolby AC3 Decoder or IEEE1394 adaptor

Audio Subsystem Full-duplex operation for simultaneous recording and playback
6 Channel speaker audio supports
Embedded 32OHM 5w earphone amplifier
Supports MIDI and dual game ports
32 Voice HRTF 3D positional audio, CRL 3D supports MS Direct
Sound3D, Aureal A3D and Creative EAX APIs
Support SPDIF

Video Subsystem Video : 8X AGP

UltraDMA IDE Ports Supports two IDE ports up to 4 ATAPI devices
Supports PIO Mode 4 up to 16.6MBps, Multi Mode 4 up to 66MBps, Multi Word Mode 5 up to 100MBps and Multi Word Mode 6 up to 133MBps with Bus Mastering
Bus-Mastering software drivers for all common multi-tasking operating systems

Embedded USB Controller Embedded USB1.1/2.0 Controller
Three EHCI USB 2.0 Controller support total 6 USB 2.0/1.1 Ports
Support USB 2.0 High-Speed Device @480 Mb/s Transfer Rates

On Board Super I/O Controller ITE 8712 LPC I/O with system monitors hardware
Two UARTs support serial ports and IR function (up to 115.2Kbps) for HPSIR and ASKIR
One SPP/ECP/EPP parallel port
One floppy disk drive connector supports up to 2.88MB
Integrates smart card reader function and interface, to be qualified for meeting PC/SC standard

Embedded system monitoring 8 external voltage inputs
2 temperature sensing for CPU and system
2 Fan speed (CPU and system) monitoring with on/off control in suspend

Boot-Block Flash ROM Award system BIOS support PnP, APM, DMI, ACPI, & Multi-device booting features

Software Driver CD (Chipset Autodetect)
Value Pack 2002
DigiDoc System Monitoring Utility

Other Feature Three 3x1 pin fan connector
2x1 pin fan connector with housing for Northbridge
Two 5x2 pin USB connectors for optional 4 front side USB2.0/1.1 ports
6x2 pin Infrared connector
3x1 pin wake on LAN connector with housing
3x1 pin wake on Modem connector with housing
Two 4x1 pin CD-in connectors with 2.54mm pitch housing
4x1 pin Aux-in connector with 2mm pitch housing
5x2 pin SPDIF connector (optional)
4x2 pin woofer/center connector for 6-channel audio
5x2 pin front side audio connector
9x2 pin front panel connector
7x2 pin Smart Card Reader connector
5x2 pin Segment display connector for 2-digits Debug LED
17x2 pin floppy connector

Fast Ethernet/Home Networking Controller with MII Interface
Support 10/100Mb Fast Ethernet or 1/10Mb HomePNA 2.0 with External PHY

You'll need to give us more of an idea of what you want ChrisReilly. For example, someone might recommend a 40Gb hard disk because it's the cheapest and someone else might recommend a 300Gb disk because it's the biggest. Everyone has their own perception of what the "best" means.

What are you actually going to do with the PC? Are you running Windows XP and any specific applications such as AutoCAD or Photoshop that need a lot of memory or processing power?

Also, could you confirm whether you're in the UK or elsewhere? Thanks