Hello everyone,
I currently have a 45 gig WD 5400 hardrive in my computer. Originally I had Win ME for the O/S and decided that I was better off formatting and putting Win 98 SE on instead (ME was not very stable). I did the fdisk, format and loaded the O/S and then I discovered that 45 Gig suddenly became 10 Gigs!
I have gone back and disabled the EZ Bios using the Data lifeguard tools disk (version 2.5) that came with the HDD when I built the system...redid the fdisk, format, and it still only wants to recover 10 gigs. The system bios is seeing the full 45 gigs, but I just cannot seem to find a way to completely wipe the ENTIRE disk and start fresh.
Help...this machine is making me crazy!!
Thank you! Tracker

Isn't there a 36Gb partition limit or something under Windows 98? I've fitted big hard disks for Win98 before but never in a single partition. Have you tried two smaller partitions?

If you are doing this off of a Western Digital floppy disk, then it might also be worth trying to do it from a Microsoft boot disk - you can get these from www.bootdisk.com.

Thank you...I will attempt to partiton and if I still have a problem I will check out the links! Tracker

Did you get your hard disk problem sorted Tracker?

Yes, and thank you for asking! I actually just finished it up a few days ago. I was sure that the HDD was going bad...but after many attempts to format and much research I discovered that the EZ Bios feature had an updated patch that would allow for easy removal!!! When I think of all of the the days I spent banging my head over this issue and it comes down to something so simple.....ARGHHH! Thanks again for all of your help, the links were priceless! Tracker

Glad to hear you got it up and running

--------------------------------------

This thread has been Resolved and has been locked to prevent other users hijacking the thread and to help others know which threads have been Resolved and which are still being worked on.

If you started this thread and the problem returns or the case has not been properly Resolved, please send a Private Message to an Administrator or a Moderator of this forum to have the thread opened again. If you have a different problem, please start a new thread.