From AGP Chip TO PCI Graphics Card...NO GO!

  1. #1
    AliveAndKickin is offline Full Member

    Unhappy From AGP Chip TO PCI Graphics Card...NO GO!

    I have removed my WinMe computer from the Internet. I want to use it as a game computer only. It is a Compaq Presario 5000 w/256mb RAM. It has an AGP intel i752 Graphics adapter. I inserted a PCI card (ATI-Rage 128VR 32M SDR PCI) into one of the PCI slots and upon restating my computer the monitor was dark. I have since installed the software drivers and reinstalled the PCI card with the same results. The directions that came with the PCI card says that I "may" have to uninstall old graphics card or if it has a graphics chip on the motherboard to refer to the systems manual on how to disable it. I cannot find a manual online so here I am. Most of my games require 16 or 32 mb graphics cards. The intel chip is 8mb. Can you help me.

  2. #2
    Jim23 is offline Dedicated Member
    Hi AliveAndKickin

    I'm not sure because I cannot find the spec for Compaq Presario 5000 w
    I think the AGP intel i752 Graphics adapter is an on-board graphics card if so it needs disabling in the bios
    Take a look here to check to see if this is the case.
    Installing or Replacing a Video Card Compaq Presario 5000 Desktop PC - HP technical support (United Kingdom - English)
    Go down to section 6 were it explains how to disable on-board graphics.

    Jim
    Last edited by Jim23; 13-03-2010 at 10:17 AM.

+ Reply to Thread