i last seen the msg frm the screen is "DRAM reload timing too tightly" i try to remove one of the ram (i gt 2 256 ram) but the screen still does not show anithing i try to change harddisk n display adapter but the screen is still blank...help plz i am willing to provide any information to help u all...

Does the monitor power up? If so does it get a green LED then a No Signal message before turning the LED amber?

Try returning the hardware as it was then enter the BIOS Setup and choose to Load Defaults then Exit Saving Settings and see what happens.

If nothing try booting with no RAM. This should give you some BEEPS. Then go back and try one stick at a time. Try different sticks and different slots until all options have been covered.

ya the monitor power up n get a green led to a orange one ...i remove both ram but no beeps sound.

Do you have the motherboard manual?

Are you familiar with resetting the CMOS?

If not can you ID the motherboard make and model and or the computer's?

okay ya i gt the bk i reset see can ma.

my motherboard is msi 865pe neo2 series.

ya i done it le but still the same.

Plug your monitor into the onboard VGA port and see if that makes a difference.

Does your case speaker work? Did you ever hear BEEPS with this setup?

Usually it will BEEP once on a successful BIOS boot. Did you ever hear this?

If the case speaker is working and no RAM = no BEEPS then the motherboard is the main suspect.

this motherboard don hav onboard vga port .. i try add in another vga..ya i heard b4 .