GeForce 6200 - Flashing Display
-
GeForce 6200 - Flashing Display
Hey guys i have an annoying problem, and some fast help would be wonderful. I have just installed a new GeForce 6200 graphics card, loaded all the drivers etc, and for some reason my display has started flashing. About every 6 seconds the screen goes black for less than a second, and then the cycle begins again. It is just the display (i think) as I can type whilst it is black and what I am writing is there when the image returns, so the actual programs I am running etc don't seem to be effected and the computer is not restarting or doing anything else abnormal at all. Quite irritating though! I assume the problem is linked to the graphics card as the monitor and cable is fairly new and was not having this problem before.
What prompted me to buy a new card in the first place was that my display kept disappearing and the monitor kept saying NO CABLE. I assumed this was due to a problem with the physical connection as moving the lead/pushing the old card lightly etc solved the problem for varying lengths of time (sometime fine all day, sometimes virtually unusable). I also hooked up the monitor and cable to another machine and was fine, so again I assumed it was a component in the PC. Not sure if that is relevant or not but thought I would mention it anyway.
Bizarrely, my current problem was not there for a little while after installing the drivers and restarting. I tweaked the resolution, colour settings and refresh rate, but nothing happened immediately after doing so, so I assumed all was fine. A few minutes later I noticed that dreaded acrid burning smell, and the flashing started. I assume the smell is just the solder heating up (at least I hope so).
Any help appreciated! I would list some specs but I don't know what you need to know that would be relevant. I use Windows XP Pro, can find out more if you need me to.. .Hope this is in the right section too.
Last edited by tebthereb; 20-10-2007 at 07:58 PM.
-
Tried restarting and reseating the card and seems OK at the moment... Having said that it was OK for a few minutes before!! Fingers crossed anyway, will post back if it recurs and if anyone knows what caused it I would be intrigued.