Hi All,

Hope im in the rt. place. Changed out my Pentiun 4 2.4 Northwood for a 2.8

Now when it boots get these readings

Processer Pentiun 4 2.10 (100X21.0)
Get to verfying Dim Pool Data....... then blank screen Thats it!!

MoBo- Eleitegroup L4S5MG/GL Rev. 3.2A
Pentium 4 2.8
Bios Award Modular 6.00PG
OS XP PRO SP2

Any Help?

Thanks T&B

I've downloaded the manual for your motherboard and according to it, the CPU parameters are automatically set for the installed CPU. I'm still going through it though, and I want to do some research on your new CPU as well.

Manual:
(http://www.ecs.com.tw/ECSWeb/Downloads/ProductsDetail_Download.aspx?DetailID=30&DetailNam e=Manual&DetailDesc=L4S5MG/GL(1.0C)&MenuID=0&LanID=9)

Does the system boot with the old processor?

If it does, then either the new CPU is bad, it's not compatable with this motherboard, or there's a problem with the current installation/contacts/power etc.

If it doesn't, you may have damaged the motherboard installing the new CPU. (The manual covers this element with "CAUTIONS" in the CPU install section.)

Thanks Dan for the responce but apted for building a new Sys.

11-129-152 CASE ANTEC| MID SLK3000-B BLK RET


17-153-023 POWER SP|430W(P4)W0070RUC RTL


13-127-174 MB ABIT IS7-E2 865PE 478
Abit (510)-623-0500

20-220-037 MEM PATRIOT 512Mx2|PTR D400 PSD1G400KH R


14-125-218 VGA GIGBTE| 6800GS GV-NX68G256D-B

Intel Pentium4/3.06/533/512/OEM
Intel Pentium 4 3.06GHz 533MHz 478pin 512K CPU OEM 30 Northwood

ThermalRight XP-90C

Panaflo 92mm High Output - FBA09A12H1BX

Nexus 120mm Real Silent Case Fan - D12SL-12

I have DVD-RW & DVD-R & WD 80G Hard Hrive as well as a floppy

Hope these were good choices I like the 3.06 Pentium has good OC abilty

All came to $810.00 not a bad price the Pent. was a bit pricie but think worth it

T&B