k when i turn on my computer my hdd's and fanz and stuf start but nothing shows up on the screen, there are no beeps it wont even beep if i take out the ram and vid card, iv tryed replacing the speeker but nothing hapends

have u tried clearing the cmos?

unplug from wall ... remove battery ... set cmos jumpers to clear ... wait a few mins. ... reset jumpers to normal ... replace battery ... plugin wall ... powerup ...

was this machine working before? did this just happen?

thaks for the reply , it was working , i just came home frome work and turned it on and this happend

my computer has 2 bios's will this make a diference?

another try would be to unplug from wall ... hold in power button for a minute (unplugged) ... plugin & powerup.

Re: my 1st post: are you familiar with the battery & jumper block?

2 BIOS meaning a motherboard plus controler card?

i have a gigybyte bord and acording to the box it haz 2 bios's and one will back the other one up if it fails

and i took the battery out but there are no jumpers that will do any thing to the cmos all of them are clearly labled

what is the board model? (letters; #'s)

does the box tell you how to access the 2nd BIOS?

ga-6veml

no it duznt

and i took the battery out but there are no jumpers that will do any thing to the cmos/bios all of them are clearly labled

i cant get any manuals from giga-byte. (strange). (links not working).

http://www.giga-byte.com/

do you have the manual?

there must be some jumper setting or switch block to clear the cmos.

http://asia.giga-byte.com/MotherBoar...ual_6vem_e.pdf
that is there server

http://files-kingneo.servehttp.com/manual_6vem_e.pdf
that is my server