ok thanks

i just need to do the latest one right? the latest one would have all the rest in it

Originally Posted by mitch24

i just need to do the latest one right? the latest one would have all the rest in it

Yes, as long as it is for your region and version number.

Make sure you follow the instructions carefully. If your Ethernet devices are unable to connect after the upgrade, power down AND UNPLUG the computer for about 30 - 60 seconds. This will ensure ATX Form Factor required +5Vsb standby voltages are complete removed from the PCI bus. Then upon reboot, the re-powered network adapter will signal its presence to the router, which will reassign the IP address.

If it still fails, unplug the router, the gateway (your cable/DSL modem) and computers. After one minute, plug in the gateway and wait for the lights to settle down. Then the router, and finally the computers.

they should all work for vista also right

Originally Posted by mitch24

they should all work for vista also right

Does not matter - it is not running on your machine, but in the router.

yeah that worked and it also has an option so i can make my xbox live nat open.........yay

Great! So all is good now?

yes never kicks anyone off every things great thanks