Hi There,

MY PROBLEM IS THAT WE HAVE DC IN WINDOWS 2003 SERVER I WATED TO START ONE SCHEDULE WORK FROM SERVER WHEN I WAS DOING THAT I FOUND THAT IN MY NETWORK PLACE OPTION SOME COMPUTER ARE NOT LISTED SO I M NOT ABLE TO DO THAT JOB SO COULD YOU PLZ HELP ME OUT ABOUT THIS PROBLEM.

Hi There,

CUD U PLZ TYPE IN PROPER ENGLISH WITH PUNCTUATION AND UPPER AND LOWER CASES AS APPROPRIATE PLZ.

Then we might be more willing to help.

Thanks.

Dear DAL,

My problem is that i have one server which is running on windows 2003 standard OS. i have to set backup schedule on my server of client computer with the help of my network places option but when i start this job i found that my most of the clients are not listed in my network place so i can't set the backup schedule so on this topic can u help me how can i see the all client computer in my network place.

I have attach one image with this message in that i have marked that present client list displayed in my network present we have more that 100 client but is shown just 75. and i want to shoe all the client in my network place so i can set the schedule.

now i though u can easily understand my problem please help me soon waiting for your reply.

Hi Jignesh,

I think what Jephree was trying to say was that, WHEN YOU TYPE IN CAPITALS, it sounds like you're shouting and we get irritated when we read forum messages that are written like SMS text messages that we have to decode .

From my experience, I would say that there could be a number of reasons why some of your PCs do not appear in My Network Places. I would suggest checking the following:

1. If the PCs have just been joined to the network, it may take some time (e.g. up to an hour) before those PCs appear in My Network Places.

2. Are the PCs on the same IP address range as the server, e.g. 192.168.0.x ?

3. Are the PCs on the same domain as the server? They might have working communication to the Internet, etc. through the network simply because they have an appropriate IP address. However, they won't be able to communicate fully around the network if they are not joined to the domain.

4. Do the problem PCs have different firewall software? Or is the firewall software configured differently on those PCs? This is the most common cause of issues like this - you may need to add the LAN IP range to the 'Trusted Sites' or 'Trusted Networks' section of the firewall software.

5. Are the PCs registered in DNS Server correctly? Try pinging the problem PCs from the server, first by IP address and then by name. To do this, go to a Command Prompt window on the server and type ping ComputerIP and press Enter. If that gives 4 valid responses, try ping ComputerName and see if that responds correctly as well.

Let us know the results of each of the above points

Hi

I am shyjo from india . I am also facing the same problem . after restaring the Clint PC it will be displayed on network . Kindly help me to sort out the issuse . I have checked the above solutions