sorry jephree i was completed away lol, what kind of detailed specifications are you looking for? no i am not registered and dont really intend to unless you need me to, so i can access information

Dick Smith's site apparently alters their links. The same page now is here:

http://www.dse.co.nz/cgi-bin/dse.fil...ogs/CTG0000918

If you copy paste the following line into Google you should get the current link to the page.

dick smith electrical USB 2.0 4-port PCI card. XH6738

I was just curious as to the detailed specs hoping to see some potential conflict with your computer.

In order to get the specs they make you register to the site.

sorry i ttok so long to get back to you, works been rather hectic with everyone leaving except me and the boss. i registered at that site so just go there and login as waty983 password hotmail. security dont concern me as everything used is dummy info lol. go on in and check it out see what u can dig up

Supports USB 2.0, USB1.1 & USB 1.0 - up to 480Mbps!


This 4 port USB 2.0 card supports up to 127 USB devices. Supports data transfer rates of 1.5, 12 & 480Mbps. Can be PCI BUS or 3.5" FDD powered (PCI by default). Works with Windows, Mac and Linux computers.

It supports 4 independent USB 2.0 ports with Hot Swap features and automatically backward compatible with system to connect the USB devices to the card. Besides, no IRQ confusing problem will occur during the whole installation procedure.


Features: Compliant with Universal Serial Bus Specification Revision 2.0
Compliant with Open Host Controller Interface Specification for USB Rev 1.0a
Compliant with Enhanced Host Controller Interface Specification for USB Rev 0.95
PCI multi-function device consists of two OHCI host controller cores for full-/low-speed signaling and one EHCI host controller core for high-speed signaling.
Root hub with 4x USB 2.0 downstream facing ports which are shared by OHCI and EHCI host controller core
4x USB 2.0 downstream ports - 3x external - 1x Internal
All downstream facing ports can handle high-speed (480 Mbps), full-speed (12 Mbps), and low-speed (1.5 Mbps) transaction.
32-bit 33 MHz host interface compliant to PCI Specification release 2.2.
Supports PCI-Bus Power Management Interface Specification release 1.1.
PCI Bus bus-master access
Operational registers direct-mapped to PCI memory space
Supported Data Transfer Rates: 1.5/12/480Mbps
Power: JP2 selects either PCI Bus power or 3.5" FDD power - 3.5" FDD power must be connected to J6; the jumper JP2is set to PCI by default
Chipset: NEC D720100AGM
O/S Support: Windows 98SE/ME/XP/2000, MAC OS 9 or higher, Linux (latest Kernel)
Warranty: 12 months return to Dick Smith Electronics

Cat No. XH6738
Category: Cards - I/O
Cards - USB 1.0, 2.0 & IEEE1394
Cards - PCI

Weblink(s): Download chipset info (276KB)...
Download latest drivers (39KB)...

http://www.dse.co.nz/cgi-bin/dse.sto...ct/View/XH6738

Driver:

http://www.dse.co.nz/isroot/dse/supp...738_DRIVER.ZIP