i recently purchased a wireless printer. i am able to conect it to my desk top pc but my lap top won't connect. I have satelite internet and a wireless router. any help woul be appreciated.

When you are connected to the network, users should go to the ‘Control Panel’ and open ‘Printers and Faxes’. A window will appear and click on the ‘Printer’ window. Then click on the ‘Add Printer’ option in order to start the Add Printer Wizard. Usually the first screen of the Wizard is the welcome screen and in the second screen users should select the type of printer they want to add and click ‘Next’. The users should make sure that they enter the right name and path for the printer. When the connection gets established depending upon your network access rights, printer access rights and local installation rights, then the printer gets added to your list.

Get wireless Internet laptops is fairly easy to do, regardless of whether your notebook is already equipped or have an older laptop that is not equipped with wireless capabilities. If you already have wireless capability all you have to do is to try and establish a connection. If you do not have wireless you can equip your laptop for Internet access that will save you the hassle of carrying Ethernet cable with you and try to find an Internet connection. If you have a relatively new laptop is a good chance that is configured with a wireless connection. How to check if your laptop to wireless capabilities, if you want to check your laptop for wireless connection and run the Windows operating system, click "Start" on the main toolbar and then click Control Panel, click in the window "Network", "Control Panel". as the new open window looking for the LAN or High Speed ​​Internet. Below is the category of "Wireless Network Connection" and then right click on the icon.
Adding your laptop wireless capability, before the addition of wireless Internet capabilities for laptops is important to note that there is a transmission protocol used to connect to the Internet. 802.11g protocol is used by most of the public Internet connection hot spot. Final Form 802. 11n, and if you happen to find that the use of public access points 802.11g router can still get a connection with 802.11n and 802.11g is automatically compatible with 802.11n, it says add wireless capabilities to use a wireless card. To install the wireless capability to your laptop, you will need a PCMCIA cards that are designed to add wireless capability to your laptop.

Here are some steps you should do for the wireless Internet for laptops. Turn off your PC: Turn off the PC completely and disconnect the power supply. Place a pair of rubber doll in the doll. Also known as an anti-static band, and protect your PC from all types of static electricity that accidentally be transferred to your PC and cause damage. Remove the rear panel: Use a screwdriver to remove the back panel of your laptop and find an empty PCI slot and contains the card. PCI slots are rectangular slots. Simply insert the PCMCIA card into an empty slot. Use care when inserting the card you do not accidentally bend one of the circuits, once the card into the slot gently push only to take place. Replace the panel and restart: Replace the rear panel, plug the portable power source and then start the computer, such as restarting the computer should automatically recognize the hardware. At this point you need to insert the CD that comes with the PCMCIA card. After inserting the CD that guides you through the process of installing drivers and software needed to build the wireless Internet.