Converting Old Vinyl To Cd

  1. #1
    SimonBendle is offline Junior Member

    Converting Old Vinyl To Cd

    Hi I wish to record old vinyl onto my PC then Convert that file into an audio CD. I also wish to be able to insert tags(not sure if this is correct word) so that if I've got a long mix I can break it up into tracks.
    Oh, I've also got nearly NO CASH

    HELP ME PLEASE

    Simon


  2. #2
    chou is offline Dedicated Member
    hhmm, i think its possible but not cheap.

    Here's how to transfer songs from those records into a digital format for use on your computer or even to create CDs out of them. Note that since you own the record or cassette this is legal to do, however it is not legal to share the resulting digital files with others.

    Before we discuss the process, let’s first talk about the equipment and software required. You will need:

    * A turntable (for LPs and 45s) and/or a tape deck for cassettes
    * A stereo with amplifier (into which your turntable and/or tape deck connect
    * A cable that connects your stereo's "Audio Out" connector to your computer's “Line in” connector on your sound card.
    * A computer with the following specs;
    o Pentium II 266 computer or better
    o 128 megs of RAM or more
    o 200 MB free space on your hard drive
    o a soundcard with a “Line in” port
    o WAV file recording software
    o WAV to MP3 conversion software
    o MP3 burning software, if you want to make audio CDs

    Let’s talk a little about this list. First you must have the means to actually play the original music.

    Vinyl needs a turntable or audio tape needs a tape deck. These older pieces of hardware can still be found in either your local pawn shop, second-hand store or a decent boutique stereo shop or vintage record store. You can get them new here or used at eBay! Or check your Dad's basement!

    Each component shouldn’t cost more than about £100 or so but remember that cheaper versions can mean cheaper quality which means a poor source from which to record.

    Second, you must hook these up through a stereo with an amplifier. The reason for this is that most (though not all) turntables require amplification.

    If you hook a turntable directly to a computer chances are the audio will be too faint to properly record. You might also experience the dreaded “feedback” if you connect this way.

    Next you’ll need a cable that converts the two “Audio Out” RCA jacks from the stereo to the single 1/8 inch “Line In” jack on your computer's sound card (the one with microphone symbol next to it or an "in"arrow).

    This sort of cable can easily be obtained at Radio Shack or a stereo equipment store or get one at Amazon .

    Next your computer needs the specifications listed as audio recording and especially converting (or ripping) and burning takes a lot of processing power and memory.

    You will be creating WAV files which are quite large averaging 10 Mb of space per minute of music, so the more you plan to record the more space you’ll need. The average LP album is around 45 minutes which would require 450 MB of hard drive space.

    Lastly there’s the software.

    WAV recording software is pretty easy to find. A couple I’d recommend are:

    LP Recorder (Trialware)
    http://www.cfbsoftware.com/lprecorder/lprecorder.htm

    MusicMatch Deluxe -
    http://www.amazon.com/exec/obidos/tg...555441-1588154

    Each program has a very straight forward interface that allows you to get up and running quickly. In each, just set the recording level and quality. Choose higher quality unless you are really tight for hard drive space.

    Then hit record, start your album or cassette playing and press stop when the desired track (or tracks) are finished.

  3. #3
    DJNafey is offline UK site moderator
    Wow, top answer Chou

    Simon, did that help?

  4. #4
    HappyBeaver is offline Bea*ering Away!
    TotalRecorder is also a top piece of software and oh sooooo cheap! www.totalrecorder.com.

    This also lets you record what you hear if you don't have the file on your pc

    I have my record player and separate tape deck plugged into my sound card but if I want to record a tape that results in separate tracks I tend to use soundforge to split it up. Not an option for you as its way expensive... but great if you have trashed vinyl though as it cleans them up etc.

    It's a totally laborious and time labouring hobby - not one I would want to do for more than a couple of albums/tapes etc.

  5. #5
    SimonBendle is offline Junior Member
    Thanks guys-

    I've got 2750 7"
    790 12"
    and 1600 LP's!!!!!!!!!!!!!!!!!!!!11

    I might be some time

  6. #6
    2badmice is offline Full Member
    Steinberg's Clean 5.0 is a treat IMO

  7. #7
    D-A-L is online now D-A-L Administrator

+ Reply to Thread